SOLUTIONS FOR ENERGY OPTIMISATION For drycoolers & air-cooled condensers contRolUnitwithaeRoconnectelectRonicboaRD AEROCONNECT is used to control the temperature or pressure, check the operating parameters, communicate with CIAT water chillers and diagnose and memorise faults. ■ Control of AC motor stages, or management of EC motor speed by 0/10 V signal,based on the temperature or pressure. ■ 2 setpoints: for example for summer/winter or daytime/night-time use. Used to reduce the operating speed and to improve the seasonal energy efficiency coefficient. ■ Stage runtime balancing (AC motors). ■ EC motor speed limitation. energy ■ Management of misting. Optimised management ■ Management of free cooling. ■ Communication: Information in multilingual clear text - Open ModBus-JBUS RS 485 protocol, - ModBus-ETHERNET TC/IP protocol, - LONWORKS/BACNET Protocol (option). contRolcabinetcontRolleDbythechilleR For drycoolers or air-cooled condensers linked to one of the following water chillers: - DYNACIAT LG 080A to 600A - DYNACIAT LGN 080A to 600A - HYDROCIAT LW 708C to 4628C - AQUACIAT LD 150A to 600A - AQUACIATPOWERLD 602C to 2000C The drycooler or condenser can be equipped, as an option, with a managed control cabinet,to be linked to the water chiller. The unit will be controlled by the water chiller and the electricity consumption of the assembly will be optimised by shifting the condensing temperature according to the outdoor temperature. CATALOGUE 2021 585 585