DYNACIATTM LG Water chillers Heat pump Technical characteristics DYNACIATTMLG 080 090 100 120 130 150 180 200 240 260 300 Dimensions Length mm 600 600 600 600 600 600 880 880 880 880 880 Width mm 1044 1044 1044 1044 1044 1044 1474 1474 1474 1474 1474 Height mm 901 901 901 901 901 901 901 901 901 901 901 Operating Weight (3) Standard unit kg 191 200 200 207 212 220 386 392 403 413 441 Unit with evaporator with single LP pump kg 250 258 258 263 266 271 431 435 442 449 465 Unit with condenser with single LP pump kg 250 258 258 263 266 271 431 435 442 449 465 Unit with evaporator with single variable-speed HP pump + condenser kg 305 313 313 321 327 334 513 521 533 544 574 with single variable-speed HP pump Compressors Hermetic Scroll 48.3 r/s Circuit A Qty 1 1 1 1 1 1 2 2 2 2 2 Number of power stages Qty 1 1 1 1 1 1 2 2 2 2 2 Refrigerant (3) R410A (GWP=2088 following ARI4) kg 3,5 3,5 3,6 3,7 4 4,6 7,6 7,8 7,9 8,7 11,5 Circuit A tCOe2 7,3 7,3 7,5 7,7 8,4 9,6 15,9 16,3 16,5 18,2 24 Oil charge TYPE: 160SZ Circuit A l 3 3,3 3,3 3,3 3,3 3,6 3,3 3,3 3,3 3,3 3,6 Power control Connect Touch Control Minimum capacity % 100 100 100 100 100 100 50 50 50 50 50 Water type heat exchanger Evaporator Plate heat exchanger with direct expansion Water volume l 3,3 3,6 3,6 4,2 4,6 5 8,4 9,2 9,6 10,4 12,5 Max. water-side operating pressure without hydraulic module kPa 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Condenser Plate heat exchanger Water volume l 3,3 3,6 3,6 4,2 4,6 5 8,4 9,2 9,6 10,4 12,5 Max. water-side operating pressure without hydraulic module kPa 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Hydronic module (optional) Single pump Pump, Victaulic screen filter, drain valves (water and air), pressure sensors Expansion tank volume (optional) l 8 8 8 8 8 8 12 12 12 12 12 Expansion vessel pressure(4) bar 3 3 3 3 3 3 3 3 3 3 3 Max. water-side operating pressure with hydraulic module kPa 300 300 300 300 300 300 300 300 300 300 300 Water connections with or without hydronic module Victaulic® Connections inch 1,5 1,5 1,5 1,5 1,5 1,5 2 2 2 2 2 External diameter mm 48,3 48,3 48,3 48,3 48,3 48,3 60,3 60,3 60,3 60,3 60,3 Casing paint Colour cde: RAL 7035 /o RAL 7024 (3) Values shown are a guideline only. Please refer to the unit nameplate (4) On delivery, the vessels are preinflated to a standard value, which may not be the optimum one for the installation. To enable the water volume to be varied as desired, adapt the inflation pressure to a value close to that which corresponds to the static height of the installation. Fill the installation with water (bleeding out any air) at a pressure more than 10 to 20 kPa higher than the vessel pressure. 514 514 CATALOGUE 2021