CLIMACIAT® Air handling unit OPTIONS AVAILABLE PER RANGE Airaccess Airtech Airclean Lift-off door X X X Filter pressure tapping Standard Standard Standard Additional filter set X X X Galvanized steel driptray X X X Stainless steel drip tray X X X Liquid manometer (supplied loosely in a kit) X X X Differential pressure switch X X X Magnehelic pressure gauge (supplied loosely in a kit) X X X Magnehelic pressure gauge factory fitted X X X Double glass porthole X X X 230V bulkhead light (supplied loosely) X X X 230V bulkhead light and wired to external switch X X X Door contact switch X X X Filter slide rails painted X X Standard Filter frame painted X X Standard 304 L or 316 L stainless steel slide rails X X X Stainless steel frontal access filter frame (fine filters •F") NA X X Painted filter frame (EPA/HEPA filters) X X Standard Stainless steel filter frame (HEPA filters •H") NA X X ATEX filters NA X X X: Option NA: Not applicable ■ Plate heat exchanger In the standard construction, the heat exchanger has aluminium - 3 efficiency levels available: from 60% to 85% plates, and can be used routinely up to an air temperature of 90°C (if the plate heat exchanger is a component of an AHU, - The plate heat exchangers are always equipped with a total the standard limit temperature is 80°C). The leakage flow rate bypass on fresh air and access hatch to the servomotor is 0.1%, the nominal flow rate for a pressure difference of - Condensate drain pan on exhaust air side,made from 400 Pa between the 2 air streams. galvanised steel with condensate drain piping as standard - Available in a stacked configuration for all sizes - Available in a juxtaposed configuration for size 60 and 70 - Access door to the condensate drain pan(s) OPTIONS AVAILABLE PER RANGE Airaccess Airtech Airclean Pre-painted aluminium plates X X X Condensate drain pan (exhaust air side) stainless steel X X X Condensate drain pan (fresh air side) stainless steel X X X Paint on baffle, partition and support X X X Plate exchangers components made of 304 L or 316 L stainless steel NA X X Painted bypass damper X X X Stainless steel bypass damper NA X X Servomotor or manual damper operation X X X Pressure tappings in intake and exhaust Standard Standard Standard Additional access door X X X Door porthole X X X X: Option NA: Not applicable CATALOGUE 2021 165 165