SC Air-cooled condensing units Optional for electronic controls AVANT / AVANT+ control (standard) Supervision solutions - pGD1 terminal for maintenance of the unit. Different solutions of supervision are available according to the - 200-m remote control kit for pGD1 terminal (pGD1 terminal + dimensions of the installation. 2 TCONN bypass cards). • pCO Web It is the solution for the management and supervision of a single unit if it incorporates the Ethernet pCO Web card. • PlantWatchPRO3 This solution is designed for monitoring small to medium- sized installations and can manage up to 30 units. Suitable for technical environments, it has no moving parts. It is available in two versions: panel and wall-mounted. Includes:7" touch screen, buzzer for notifications,1 USB port and 1 SD card slot for downloading reports, charging peripherals for the models and service pack applications. In thiscase, each unit needs one RS485 Carel / Modbus board. • PlantVisorPRO2 This solution is designed to manage and monitor air-conditioning installations with up to 300 units. It performs advanced monitoring and maintenance functions and enables areas and groups to be created which simplify management - Return or ambient air temperature sensor connected to the of the installation. It can also incorporate energy meters for board which replaces the ambient air temperature sensor on monitoring the power consumption of the installation. the TCO thermostat. A return probe is required for the fire PlantVisorPRO2 is available in two versions: protection safety device. • Box: comprises the CPU unit and, as an option, a screen - Mixing temperature probe: compulsory for free cooling and a keypad. management • Touch: includes the CPU and the touch screen in the one . CIATrtc control (optional) device. - TCO user terminal, instead of pGD1 terminal. In this case, each unit needs one RS485 Carel / Modbus - Control without pGD1 terminal (for units with shared terminal). board. - 200-m remote control kit for pGD1 trminal (pGD1 terminal +e 2 TCONN bypass cards). - Ambient temperature sensor with RS485 communication. By default, the control incorporates an NTC probe. Note:An ambient probe with RS485 communication is required for installation to more than 30 m. pCO Web (1 unit) - Double ambient temperature sensor with RS485 communication. - Ambient T+RH probe with RS485 (compulsory in units with enthalpic or thermo-enthalpic free cooling as an option). In this case, an outdoor air humidity sensor is also added . - Air quality sensor to be installed in the room or in the duct to enable measurement of CO and/or volatile compounds.2 PlantWatchPRO3 (30 units) Communication The AVANT/AVANT+ and CIATrtc controls enable connection to a centralised technical management system by using a specific BMS card for some of the following communication protocols: - RS485 serial cards for network communication with protocols: Carel, Modbus, LonWorks®, BACnetTM MSTP, Konnex. PlantVisorPRO2 (300 units) - Ethernet pCO Web card for network communication with These systems allow the installation in remote management. protocols:Modbus TCP/IP, BACnetTM Ethernet, TCP/IP, Through a single connection to the Internet is accessed the SNMP V1-2-3, FTP and HTTP. information system. The Web interface, which is available for the local user,allows the monitoring and the complete configuration of the installation: from the office or any other user’s current location. For remote control of multiple sites, there are dedicated tools for centralised management such as RemotePRO and RemoteValue. 282 282 CATALOGUE 2021