CLIMACIAT® Air handling unit ■ Electric heater - Shielded resistors in stainless steel scrolled finned tubes - - To set up the coil, refer to the instructions sent with each unit. Connection to copper jumper strips. - Take the necessary measures to prevent abnormal - Assembly with double insulation. overheating when the fan is switched off (fan delay). - The electric heater is equipped with two safety thermostats. The first has a manual reset, the second has an automatic reset. OPTIONS AVAILABLE PER RANGE Airaccess Airtech Airclean Slide rails painted X X X 304 L or 316 L stainless steel slide rails X X X 304 L or 316 L stainless steel coil casing X X X Single- or three-phase connection X X X X: Option NA: Not applicable ■ Refrigeration coil Depending on the type of coil and the diameters required, the Fluids: manifolds and supply tubes are - Chilled water - Copper tubes with unions up to a diam. of 2”1/2. • Construction with copper tubes and aluminium fins. - Grooved steel tubes for larger diameters. • Operating pressure for water: 16 bar as standard - Higher - Direct expansion evaporation pressures on consultation. • Construction with copper tubes and aluminium fins. • Sloped condensate drain pan with drain tubes to be • Sloped condensate drain pan with drain tubes to be connected on site to a siphon (compulsory requirement). connected to a siphon on site (compulsory requirement). • Droplet separator as standard if necessary, as an option on • Droplet separator as standard if necessary, as an option on request. request. • Removable sealing flanges between the casing and manifolds • Standard smooth copper refrigerant supply tubes (supplied up to 3” in diameter, preventing damage to the sealing capped) system during connection operations. • Manifold on fluid intake as standard. OPTIONS AVAILABLE PER RANGE Airaccess Airtech Airclean Chilled water coil X X X Direct expansion evaporation coil X X X Access panel on droplet separator as standard if compulsory Precoated fins/ max. primary fluid temperature 110°C X X X Stainless steel tubes coil NA X X Copper fins coil X X X ALTENA treatment, max. temperature 160°C X X X BLYGOLD treatment, max. temperature 90°C X X X HERESITE treatment, max.temperature 180°C X X X Slide rails painted X X X Stainless steel slide rails X X X 304 L or 316 L stainless steel coil casing X X X 316 L stainless steel condensate drain pan X X X 316L stainless steel hygienic drain pan NA X X Insulated drain pan ( cell foam) X X X Headers/elbows insulation X X X All stainless steel droplet separator (frame and medium) X X X Polypropylene blade droplet separator, galvanised frame X X X Polypropylene blade droplet separator, stainless steel frame X X X Aluminium blade droplet separator, galvanised frame X X X Aluminium blade droplet separator, stainless steel frame X X X Pressure tapping, upstream and downstream X X X Standard screw flanges X X X Stainless steel screw flanges X X X Tubes with quick connections (copper tubes) (victaulic type) X X X Threaded connections (steel tubes) X X X Frost protection sensor support X X X X: Option NA: Not applicable CATALOGUE 2021 167 167