CLIMACIAT® Air handling unit ■ Mixing and air intakes The air intakes and mixing section may be installed at the Depending on the finishes: intake,inserted between the functions or installed at the ● CLIMACIAT® Airaccess device outlet. - Class 1 galvanised steel blades and frame compliant with These functions are equipped with dampers formed of EN1751 counter-rotating profiled blades, with lateral gaskets, and ● CLIMACIAT®Airtech / Airclean driven by conrods. These dampers are installed outside of or inside the casing, - Class 3 galvanised steel blades and frame compliant with depending on the solution chosen. EN1751 Independent control of the louvres: manual, motorised or ready to be motorised The functions provided depend on the selection: - Isolation damper - Frost protection damper - Safety damper (compliant with French fire security normative , article CH 38) - 2-way mixing with air intake - 2-way flow distributions: top, front or lateral - 3-way mixing: aligned, stacked or juxtaposed OPTIONS AVAILABLE PER RANGE Airaccess Airtech Airclean Servomotor operated damper X X X Manual operated damper X X X Class 3 damper with defrosting system X X X Class 4 airtightness damper compliant with EN 1751 NA X X Polyester coated face and bypass dampers ( frame and blades) X X X Stainless steel 304L damper NA X X ATEX damper NA X X Stainless steel drain pan X X X Hinged access door X* X* X* Lift-off door X* X* X* Porthole on door X* X* X* 230V bulkhead light X* X* X* Door contact switch X* X* X* * Availability depends on the configuration X: Option NA: Not applicable CATALOGUE 2021 163 163